A set of three seriously heavy duty inner tubes.
With straight valve, and dust cap (if you need a bent valve then simply add an Easy Pump Access Bent Valve Extension below)
Heavyweight adds about 150g per wheel, approx. 1lb to the weight of the pushchair.
easy to fit simply replaces the existing inner tube
protects the side walls of the tyre not just the main body of the tread
protects against punctures, used on special needs mobility vehicles
Size: 12 1/2" x 2 1/4"
If your tyres are worn or several years old and have degraded then you will suffer more punctures. We can supply Replacement Tyres
If you have a Phil & Teds pushchair with 12 1 /2" x 1.75
x 2 1/4" tyres then either see further down the page
or you can fit new tyres see Replacement TyresNote. Store in a warm place before fitting - increased flexibility makes fitting easierThorn Resistant Inner Tube Fitting InstructionsYou will need tyre levers to remove the tyre before fitting the replacement inner tube. If you don't have tyre levers simply tick the box below.
For real 'belt & braces' puncture protection see also Sureride Anti-Puncture Tape
Size: to fit tyre 12 1/2" x 2 1/4"
Size: to fit wheel rim 62mm x 203mm